Europump II electro pump

Submersible bilge pump.

  • CE certified by RINA in compliance with Law 94/25, directive ISO 8846
  • Model 2000
  • 12V 11A
  • 128l/min
  • Size: 120x150mm
  • Hose coupling ?: 29mm
" "79083
Les merShow less
kr 690.00
På lager
Referanse:
M16-122-14
Produktdetaljer
M16-122-14
Sist vist
Referanse: M16-122-14
kr 690.00
Submersible bilge pump.CE certified by RINA in compliance with Law 94/25, directive ISO 8846Model 200012V 11A128l/minSize: 120x150mmHose coupling ?: 29mm" "79083
16 andre produkter i samme kategori:
Referanse: M16-106-01
kr 2,150.00
IP44 watertight permanent magnet motor in compliance with ISO8846 standards. For continuous cooling in engine rooms. White ABS body. 12V / 12A Flow 500 m3/h A = 100mm B1 = 110mm B = 103mm C = 119mm D = 135mm E = 281mm...
Referanse: M16-503-12
kr 540.00
It can feed 2 taps at the same time. Fitted with circuit breaker against overloads.It can run dry without damage.CE markedHose coupling ?: 10mm12V 2A3l/minSize: 170x100x60mmCut-out pressure: 2,45 bar" "79125
Referanse: M18-002-35
kr 2,850.00
Traditional spiral hose for plumbing, pumps, etc. Made of clear PVC, fitted with steel spiral. Very soft, it curves as much as itsouter diameter without crushing. Ideal for sea cocks and skin fittings....
Referanse: M15-257-30
kr 1,050.00
Chromed brass / plasticASA-plastic caseSurface/vertical mountingLength: 2,5mInner measurements: 148x74mmOuter measurements: 180x105mmDepth: 40mm" "79043
Referanse: M52-194-50
kr 1,190.00
Made of white polyethylene, standard version with rectangular sections. Suitablefor intallation on the central part of the hull or beneath the bow floor. Includesinspection cover and 4 blind thread holes size...
Lukk
Trykk for flere produkter.
No products were found.

Meny

Innstillinger

Trykk for flere produkter.
No products were found.