Kellermann Flasher Relay R1

ECE-tested
Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay
Connection to indicator control light also possible
Restricts the accompanying flashing of non-activated indicators
Load-independent / steady flash rate
Switching capacity 0-50W by 12V/ 0-24W by 6V
Very small dimensions 22 x12 x 6 mm (L/W/H)
Suitable for indicator switches
Suitable for 6 and 12 volt DC applications" "423098
Les merShow less
kr 308.00
Beregn lengre leveringstid
Bestillingsvare
Referanse:
152-123965
Beskrivelse
Micro relay for the pros
The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch, or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ?hazard warning? effect will then be effectively All necessary components required for installation are included.
Les merShow less
Produktdetaljer
152-123965
Sist vist
Referanse: 152-123965
kr 308.00
ECE-testedSimple installation in feed to the indicator switch or swap the original 2-3 pole flasher relayConnection to indicator control light also possibleRestricts the accompanying flashing of non-activated...
16 andre produkter i samme kategori:
Referanse: 152-180100
kr 1,310.00
ECE-tested for rearReplaces the existing brake/rear light as well as the indicatorSpecial flashing effectUnique and homogeneous light ringExtreme light powerHPT?- Homogenous Projection TechnologyKellermann HighPower...
Lukk
Trykk for flere produkter.
No products were found.

Meny

Innstillinger

Trykk for flere produkter.
No products were found.